Skip to main content

LIFEPO4 LITHIUM BATTERY

S48-100LFP STACK-LV

Series S-SERIES LFP ESS Warranty See Warranty Terms
Volts 48 Design Stackable
Terminal Type 4x M8 Terminals (2+/2-)
Size & Thread M8
Charge | Discharge
Charge Voltage Range 55.2V - 57.6V
Recommended End of Discharge Voltage 48.0 V
End of Discharge Protection Voltage 44.8 V
Recommended Charge Voltage 56.0 V
Recommended Charge Current
0~10°C (32-50°F) 0.2C 20A
10~35°C (50~95°F) 0.5C 50A
35~50°C (95~122°F) 0.2C 20A
Charge Mode:

Closed Loop: Follow inverter setup.

Open Loop: Charge at recommended voltage & current by temperature following directions in the S48-100LFP STACK-LV Battery Operating Manual.

Max Continuous Charge Current 100 A
Max Continuous Discharge Current 100 A
Charge Temperature Range 0°C~55°C (32~131°F)
Discharge Temperature Range -20°~60°C (-4~140°F)
Storage Temperature Range -5°~45°C (23~113°F)
Capacity
Nominal Capacity 100 AH
Total Energy 5.12 kWh
Nominal Voltage 51.2 V

Safety & Certification

  • MH5032778: UL 9540, UL 9540A, UL 1973
  • Prismatic LiFePO4 cells [100Ah prismatic cell] (UL 1642)
  • IEC62619 (cell), UN38.3 (cell/pack)
  • ROHS (cell), CE system certification, IP52 Rating

Design

  • Modular, stackable design
  • Up to 8 parallel connectivity
  • Integrated display
  • Battery status indication
  • CAN bus & RS-485 connectivity
  • External breaker access
  • PC & Mobile App Connectivity
  • Modular LFP Stack Base+Top Assembly (shown)
    • Install up to 8 x S48-100LFP STACK-LV units

Battery Management System (BMS)

  • Integrated hardware BMS inside
  • Independent charge & discharge protection
  • Short-Circuit Protection, Over-Voltage Protection, Low-Voltage Protection, Over-Current Protection, Low-Temperature Protection, Over-Temperature Protection
  • Secondary protection – Internal BMS Switch & Relay, External Breaker Access

48V LFP Profile

Specifications
Weight 48.5 kg 107 lbs
Length 450 mm 17.7"
Width 600 mm 23.6"
Height 173 mm 6.81"
Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process & battery components.
Container Steel
Handles Built-in
Internal BMS Model 48100-5G-UL
Expected Cycle Life >6000 @ 80% DOD (.5C @ 25°C, 80% EOL), >3500 @ 100% DOD (1C @ 25°C, 70% EOL)
Series Connection No
Parallel Connection 8
Connectivity

1x Link In (internal), 1x Link Out (internal)

1x CAN bus (external) , 1x RS-485 (external)

Refer to S48-100LFP STACK-LV Battery Installation Guide for compatible inverters, communication types & protocols.

Detailed Illustration

Rev.#1 | August 2025